please measure to the nearest 1/8" expressed as i.e.
- 8 1/2" not 8.5" as that also could mean 8 5/8"
3/4" - 1/2" - 5/8" - 7/8" etc
Actual
Measurements
in inches - to the nearest 1/8"
A
For Cheeks; Back corner of eye down to fold of leather round
bit ring
B
alternative
for Cheeks; Back corner of eye to point of lip
C
Back of ear round front of Brow to back of other ear; take
measurement from the front of headpiece closest to the ear, not the back.
D
Back Corner of eye, over poll to back corner of other eye.
E
Using your usual Bit, measure from the bit ring, over poll to bit
ring on other side or 2 1/2" up from corner of mouth
F
Point of mouth over poll to point of mouth
G
Round the Nose, where you normally have noseband or 1 1/2"
below prominent cheek bone
H
Back of eye to top of noseband
I
1
1/2" below cheek bone over poll to same level other side, or top of
where you normally have noseband.
J
Base of Ear under Throat, to Base of Ear
K
Bottom of Browband - over top of head to the bottom of Browband the
other side.
Measure
Tight to the head for accurate results; if they are not accurate, the end
fit won't be so good.
Please
use the bit you intend using on the bridle as bit ring sizes vary & it
will affect the length of the cheeks.
Please note that as these bridles are not standard
fit, they are individually made to your own specification and will not fit
anything else, therefore they cannot be returned, so Please
be accurate in your measuring, remember - measure 3 times - cut once!
If you
make a mistake and the part can be used for another order, i may be able
to replace that particular part only.
Payment is required before i can
start work on any leather work.( see Home page for payment options).